中间包装
A packaging component positioned between inner and outer packaging to provide additional protection, separation, or containment for dangerous goods.
View termCategories
Dangerous Goods
Browse Dangerous Goods terms for logistics professionals.
Languages
保护衬垫
A liner placed within a package or container to provide an additional barrier, preventing contamination or reaction between contents and the packaging material.
View term倾斜指示器
A device attached to a shipment to detect and indicate if a package has been tilted beyond a preset angle during handling or transit.
View term内包装
Packaging for containment placed inside an outer packaging; used in combination packaging for dangerous goods to provide separation and protection.
View term冲击指示器
A single-use device attached to a package to show if excessive shock or impact has occurred during transit, used for monitoring sensitive or dangerous goods.
View term冲击标签
A label or sticker applied to a package to indicate if the shipment has experienced impact above a specified threshold during transport.
View term减压
A built-in safety feature in packaging or closures designed to prevent excessive internal pressure by allowing controlled venting, per IATA and IMDG regulations.
View term包装指令
A specific regulatory code or set of detailed requirements issued by authorities (e.g. IATA, IMDG, ADR) dictating the permitted packaging methods for dangerous goods shipments.
View term包装类别
A classification that reflects the degree of danger presented by a substance, determining the type of packaging required (I, II, III) per UN Model Regulations, IATA DGR, IMDG, ADR.
View term包装说明
A specific regulatory code or set of rules that prescribes the approved methods, materials, and container types for packaging dangerous goods for transport, as detailed in IATA DGR, IMDG, ADR.
View term单一包装
A packaging consisting of only one receptacle and any absorbent, cushioning and other components necessary for the packaging to perform its containment function. Used for dangerous goods as per IATA DGR, IMDG Code.
View term危险品标签
A regulatory label applied to packages of dangerous goods to identify the nature of the hazard per IATA DGR, IMDG, and ADR transport rules.
View term压力容器
A container designed to hold gases or liquids at pressures substantially different from ambient pressure, regulated for transport under UN and IMDG codes.
View term吸收材料
Material placed inside packaging to absorb liquids in case of leakage or spillage of dangerous goods, as specified in UN packaging instructions.
View term堆码测试
A test required by UN regulations to confirm a packaging’s ability to withstand a specified compressive load over time, simulating stacking during storage and transport.
View term塑料箱
A rigid plastic box used for the storage and transport of dangerous goods, offering lightweight protection and chemical resistance.
View term外包装
The external packaging used to contain and protect one or more inner or intermediate packagings; provides structural integrity for the transport of dangerous goods.
View term外包装合规
The regulatory requirement that an overpack containing dangerous goods meets all applicable marking, documentation, and handling standards as per IATA, IMDG, ADR.
View term外包装标记
A regulatory marking required on an overpack containing dangerous goods, to indicate that multiple packages are combined for transport (IATA, IMDG, ADR).
View term安全封条
A tamper-evident closure applied to packaging or container openings to indicate unauthorized access, used in accordance with IATA DGR, IMDG, and carrier security protocols.
View term封口说明
Official instructions provided by the packaging manufacturer detailing correct closure methods and torque for dangerous goods packaging, as required by UN certification.
View term帽封
A tamper-evident seal or closure applied to the valve or opening of a drum or cylinder to ensure security and integrity during transport.
View term应急桶
A specially constructed drum used to contain leaking, damaged, or non-compliant packages of dangerous goods during transport, as per UN Model Regulations.
View term性能测试
A series of standardized laboratory tests (drop, leak, stack, etc.) performed on packaging to ensure compliance with UN requirements for dangerous goods transport.
View term排气装置
A device integrated into packaging or closure to allow safe release of gas or vapor, preventing pressure buildup as per dangerous goods transport regulations.
View term操作标签
A label indicating special handling instructions for packages, such as orientation, temperature sensitivity, or restrictions, required by transport regulations.
View term方向标签
A label showing the correct upright position of a package, mandatory for certain dangerous goods by IATA DGR, IMDG, and ADR, to prevent leaks or spillage.
View term有限数量
A regulatory designation for shipments of dangerous goods packed in small amounts, allowing for reduced packaging, marking, and documentation under transport rules (IATA DGR, ADR, IMDG).
View term木箱
A solid or slatted wooden box designed for shipping and protecting heavy or large dangerous goods, as per international packaging standards.
View term柱塞锁
A security device fitted to the valve of a gas cylinder or container to prevent unauthorized access or accidental opening during handling and transport.
View term气泡膜
A flexible, shock-absorbing plastic wrap (commonly bubble wrap) used to protect fragile dangerous goods within packages during handling and transport.
View term气瓶阀门
A specialized valve fitted to the neck of a gas cylinder to control the flow and ensure secure containment during handling and transport.
View term气雾剂纸箱（联合国认证）
A UN-certified outer packaging designed specifically for transporting multiple aerosol cans, conforming to IATA/ICAO, ADR, and IMDG requirements.
View term泄漏测试
A required test for packaging that involves checking for leaks or loss of contents to ensure safe transport of liquids, as specified in UN and IATA regulations.
View term泡沫内衬
A precut or custom-formed foam component placed inside packaging to immobilize and protect dangerous goods, widely used for laboratory vials or sensitive instruments.
View term液压试验
A regulatory test in which a packaging is filled with liquid and subjected to internal pressure to verify integrity, as required for UN-approved containers for liquids.
View term温度控制
Operational process or equipment to maintain required temperature ranges for dangerous goods during transport, as specified by IATA DGR, IMDG Code, and carrier instructions.
View term相容性测试
A test performed to ensure that the packaging material does not react adversely with the dangerous goods, required for UN packaging approval.
View term纤维桶
A cylindrical container made of fiberboard, used for packing solid or powdered substances, including certain dangerous goods per UN packaging codes.
View term结构完整性
The ability of packaging to maintain its shape and containment function under normal transport conditions, as required by UN performance tests.
View term绝缘包装
A specialized package with thermal insulation properties designed to protect temperature-sensitive dangerous goods during transport.
View term缓冲材料
Material placed around or between packages or within packaging to protect dangerous goods from shocks and vibration during transport, as specified by IATA DGR and IMDG Code.
View term蛭石填充物
A granular, absorbent mineral used as loose fill inside packages to absorb leaks and cushion dangerous goods, required for certain hazardous liquid shipments.
View term豁免数量
A special regulatory category for dangerous goods packed in very small quantities, meeting strict limits, with further reduced packaging and documentation requirements (IATA DGR, IMDG, ADR).
View term跌落测试
A mandatory test for dangerous goods packaging in which a filled package is dropped from a specified height to verify integrity, per UN requirements.
View term金属罐
A cylindrical or rectangular metal container used for the secure transport of dangerous goods such as solvents, paints, or flammable liquids, conforming to UN packaging standards.
View term钢桶
A cylindrical container made of steel, used to transport liquids or solids, including regulated dangerous goods under UN codes (e.g., UN1A1/UN1A2).
View term锂电池标识
A specific mark required on packages containing lithium batteries, as specified by IATA DGR, IMDG, ADR, for air, sea, and road transport.
View term阀门保护
A safety device or enclosure designed to shield the valve of a gas cylinder from impact or accidental operation during handling and transport.
View term防篡改封条
A single-use seal applied to container or package closures that shows visible evidence if tampered with, as required by carrier and customs security standards.
View term